Car Engine Parts Kalispell MT

This page provides relevant content and local businesses that can help with your search for information on Car Engine Parts. You will find informative articles about Car Engine Parts, including "Racing Rotating Assemblies Cranks, Rods and Pistons". Below you will also find local businesses that may provide the products or services you are looking for. Please scroll down to find the local resources in Kalispell, MT that can help answer your questions about Car Engine Parts.

Northwest Truck Repair
(406) 755-9762
1200 E Oregon Lane
Kalispell, MT
Services
Truck Parts

Napa Auto Parts
(406) 892-4345
1750 Us Highway 93 S
Kalispell, MT
Services
Auto Parts, Car Washes, Car Detailing

Norbys Conoco Car Care Center
(406) 755-3797
196 3rd Avenue East N
# N
Kalispell, MT
Services
Auto Parts,AC and Heating Repair,Clutch Repair,Gas Stations

Western States Equipment CO
(406) 752-3030
3500 US Highway 93 South
Kalispell, MT
Services
Truck Parts

LA Salle Automotive
(406) 752-1156
2711 US Highway 93 South
Kalispell, MT
Services
Truck Parts

Bulletproof Bedliners and Accessories
(406) 885-4637
1280 Us Highway 2 East
Kalispell, MT
Services
Transmission Repair,Truck Parts,Tune up Repair

Carquest Auto Parts Store
(406) 755-3659
535 W Idaho St
Kalispell, MT
Services
Auto Parts

Shadow Enterprises
(406) 257-8468
1035 W Center Street
Kalispell, MT
Services
Auto Glass Repair,Fabrication and Restoration,Truck Parts

Diesel Shop
(406) 752-2093
1485 Mount Highway 35
Kalispell, MT
Services
Truck Parts

Carquest Auto Parts Store
(406) 892-4375
1625 9th St W
Columbia Falls, MT
Services
Auto Parts

Racing Rotating Assemblies Cranks, Rods and Pistons

The crankshaft, pistons and connecting rods inside an engine convert thermal energy in the cylinders into rotational energy that produces usable horsepower and torque at the flywheel.

Larry Carley

Building a performance engine requires assembling the optimum mix of rotating components that are compatible with the block and heads, properly matched with each other, and balanced to precise tolerances.

The easiest way to get the right combination of parts is to buy a complete rotating assembly from a supplier who offers such kits.  Most suppliers offer a wide range of rotating assemblies for street, strip or circle track applications. A complete kit takes the guesswork out of matching the rod lengths and piston configurations with a stroker crank, or matching piston and rod weights with the counterweights on a crank (particularly lightweight cranks). For an extra fee, many suppliers will balance their rotating assemblies for you, which they say reduces the risk of balancing errors that sometimes occur when cranks are incorrectly balanced or over-drilled to correct a heavy spot.

Though crankshaft, connecting rod and piston kits are often marketed directly to racers who want to assemble their own engines in their garage, kits are certainly an option for professional engine builders who are working within time and/or budget restraints, or who lack their own balancing equipment. Buying a complete rotating assembly (which may also include bearings and piston rings) versus sourcing the crank, rods, pistons, rings and bearings from different suppliers reduces the risk of mismatched parts that can cause assembly problems, durability and balance problems. It’s one-stop shopping – and only one supplier to deal with if there are any problems.

For example, it makes no sense to spend big bucks on a lightweight crankshaft, then mate it with a set of relatively heavy connecting rods and pistons. The advantages of using a lightweight crank (faster throttle response and more rapid rpm changes) would be reduced because of the heavy pistons and rods. A lightweight crank must be used with lighter pistons and rods to take full advantage of the reduced rotating mass of the crank.

Mismatched parts can also create balance problems if the mass of the counterweights on a crank don’t closely match the reciprocating mass of the pistons and rods. A lightweight crank has smaller counterweights because it is designed for lighter pistons and rods. If you try to use pistons and rods that are too heavy for the crank, balancing the crank will require adding slugs of expensive Mallory (heavy metal) to offset the added mass. That adds weight back to the crank and undermines the advantages of buying a lightweight crankshaft to reduce weight.

It’s a Balancing Act
A precision balance job is absolutely essential for any high revving performance engine, but it’s also recommended for street performance engines, too. Ba...

Click here to read more from Engine Builder

Babcox Media • www.babcox.com
3550 Embassy Parkway
Akron, OH 44333
330-670-1234 • (FAX) 330-670-0874