Cutters and Abrasives Amarillo TX

Looking for Cutters and Abrasives in Amarillo? We have compiled a list of businesses and services around Amarillo that should help you with your search. We hope this page helps you find Cutters and Abrasives in Amarillo.

Aardvark Services, Inc.
(806) 356-0020, 001-2004
5825 Canyon Drive
Amarillo, TX
Certifications
Blue Seal Certified
Membership Organizations
National Institute for Automotive Service Excellence (ASE)

Data Provided By:
Barney's Auto Service
(806) 373-9746, 001-2004
3311 Amarillo Boulevard West
Amarillo, TX
Certifications
Blue Seal Certified
Membership Organizations
National Institute for Automotive Service Excellence (ASE)

Data Provided By:
Custom Exhaust Systems
(806) 373-3825
2400 E Amarillo Boulevard
Amarillo, TX
Services
Auto Service & Repair, Brakes Service & Repair, Mufflers & Exhaust Systems Service & Repair
Hours
Mon-Sat

Meineke Car Care Center
(806) 331-1907
913 S Georgia St
Amarillo, TX
Services
Mufflers Repair

Quick Check Battery and Muffler
(806) 373-6988
1700 SE 3rd Avenue
Amarillo, TX
Services
Mufflers Repair

D & H Generator Service
(806) 372-4395
1108 S Grand Street
Amarillo, TX
Services
Auto Air Conditioning & Heating Service & Repair, Auto Service & Repair, Auto Radiator Repair & Rebuilding, Brakes Service & Repair, Gas Engines Retail
Products
Sales, Service, Parts, Engines, Portables, New Radiators, Rvs,

D & H Generator Service - D & H Garage & Radiator Service
(806) 372-4395
1108 South Grand Street
Amarillo, TX
Services
Auto Service & Repair, Auto Radiator Repair & Rebuilding, Auto Radiators Retail, Generator Dealers, Gas Engines Retail

Jimmys Frame and Body Shop
(806) 355-0133
801 S Cleveland Street
Amarillo, TX
Services
Alignment Repair,Mufflers Repair

Precision Transmission
(903) 784-4712
300 Ross Street
Amarillo, TX
 
Jiffy Lube
(806) 374-8877
1221 Ross St
Amarillo, TX
Services
Oil Change and Lube, Automotive Transmission

Data Provided By:

Advanced Machine Tooling – Cutters and Abrasives

High speed milling machines, boring machines and sophisticated CNC machining centers are found in many machine shops today. Faster cutting speeds and automated controls have boosted productivity as well as precision. But to get the most out of these machines, the proper tooling inserts must be used.

Larry Carley

The key to boosting productivity is to remove more metal in less time. However, faster cutting speeds and feeds require tooling inserts that can take the heat and abuse without dulling. To achieve these goals, tooling suppliers have come up with various cutter shapes, edge geometries and surface coatings that significantly improve tool performance and life.
One way to achieve better tool performance is to use an insert that cuts easier so less horsepower is required to turn it, even at high speeds and feed rates. An insert that cuts cleanly and easily will produce a smoother finish and experience less vibration and chatter.

The angle at which an insert is held with respect to the work surface affects how efficiently it cuts. Positive rake tooling holds the insert at a slight angle so the edge of the insert cuts into the surface of the metal, sort of like a plow digging into soil. Positive rake tooling generally requires less cutting force and pressure, runs cooler and provides longer insert life.

But it can also increase edge chipping on inserts, so it typically works best with shallow cuts and lower speeds and feeds. Also, a positive rake only allows the upper edge of the insert to be used, preventing the insert from being flipped over when the edge becomes dull. Thus, a four-sided positive rake insert would have only four cutting edges (each side of the square on the top side).

Negative rake tooling, by comparison, holds the tool perpendicular or at a slight negative angle to the work piece so the edge of the insert drags across the surface with more of a scraping action as it cuts. This requires more pressure and horsepower to machine the metal, and it produces more heat. But a negative rake also provides more support for the insert and allows deeper cuts and high stock removal rates at higher speeds.

A negative rake also doubles the number of available cutting edges that can be used on a single insert, thus doubling tool life. A square insert can provide eight cutting edges, and a triangular insert can provide six edges. When all of the edges on one side of the insert become dull, it can be flipped over so the edges on the opposite side can be put to work. Negative rake tooling works well for machining hard, brittle metals.

Abrasive Choices
The development of carbide materials with extremely fine grain size has improved the durability and performance of carbide cutting tools. Carbide valve guide reamers and carbide valve seat cutters are indispensable tools in most shops today. Carbide inserts are also great for high speed milling and boring operations. Newer style boring machines with spindle...

Click here to read more from Engine Builder

Babcox Media • www.babcox.com
3550 Embassy Parkway
Akron, OH 44333
330-670-1234 • (FAX) 330-670-0874