Cutters and Abrasives Branson MO

Looking for Cutters and Abrasives in Branson? We have compiled a list of businesses and services around Branson that should help you with your search. We hope this page helps you find Cutters and Abrasives in Branson.

Budget Truck Rental
2652 Shepherd Of The Hills
Branson, MO
Auto Service & Repair

B at Boys
(417) 339-2697
2130 State Highway 248
Branson, MO
Auto Service & Repair, Mufflers & Exhaust Systems Service & Repair, Tires Wholesale & Manufacturers

Auto Lock Doc
(417) 335-2329
Hollister, MO
Auto Service & Repair, Auto Locks & Lockout Services, Keymakers, Locksmiths' Equipment & Supplies
Keyless Remotes

Branson Pennzoil 10 Minute Lube
(417) 335-5182
249 Shepherd Of The Hill
Branson, MO
Oil Change and Lube

Branson Tire & Service
(417) 334-0501
206 N Business Us Highway
Branson, MO
Car Washes, Car Detailing, Tire Shops

B B Muffler
(417) 336-6533
124 Auburn Road
Branson, MO
Auto Service & Repair, Brakes Service & Repair, Mufflers & Exhaust Systems Service & Repair

Auto Go
(417) 272-0091
17873 State Highway 13
Reeds Spring, MO
Auto Service & Repair, Brakes Service & Repair, Tires Retail, RVs & Campers Service & Repair, Auto Inspection
Mon-Fri: 08: 00 AM-05: 00 PM

Jim's Auto Body, Inc.
(417) 546-5443, 001-2004
150 Jessi Road
PO Box 132
Forsyth, MO
Blue Seal Certified
Membership Organizations
National Institute for Automotive Service Excellence (ASE)

Data Provided By:
Any Body'S Garage
(417) 973-0333
1653 East State Hwy 76
Branson, MO
Long Beach Auto Body
(417) 334-1910
E Highway 76 & T
Branson, MO
Collision Repair

Data Provided By:

Advanced Machine Tooling – Cutters and Abrasives

High speed milling machines, boring machines and sophisticated CNC machining centers are found in many machine shops today. Faster cutting speeds and automated controls have boosted productivity as well as precision. But to get the most out of these machines, the proper tooling inserts must be used.

Larry Carley

The key to boosting productivity is to remove more metal in less time. However, faster cutting speeds and feeds require tooling inserts that can take the heat and abuse without dulling. To achieve these goals, tooling suppliers have come up with various cutter shapes, edge geometries and surface coatings that significantly improve tool performance and life.
One way to achieve better tool performance is to use an insert that cuts easier so less horsepower is required to turn it, even at high speeds and feed rates. An insert that cuts cleanly and easily will produce a smoother finish and experience less vibration and chatter.

The angle at which an insert is held with respect to the work surface affects how efficiently it cuts. Positive rake tooling holds the insert at a slight angle so the edge of the insert cuts into the surface of the metal, sort of like a plow digging into soil. Positive rake tooling generally requires less cutting force and pressure, runs cooler and provides longer insert life.

But it can also increase edge chipping on inserts, so it typically works best with shallow cuts and lower speeds and feeds. Also, a positive rake only allows the upper edge of the insert to be used, preventing the insert from being flipped over when the edge becomes dull. Thus, a four-sided positive rake insert would have only four cutting edges (each side of the square on the top side).

Negative rake tooling, by comparison, holds the tool perpendicular or at a slight negative angle to the work piece so the edge of the insert drags across the surface with more of a scraping action as it cuts. This requires more pressure and horsepower to machine the metal, and it produces more heat. But a negative rake also provides more support for the insert and allows deeper cuts and high stock removal rates at higher speeds.

A negative rake also doubles the number of available cutting edges that can be used on a single insert, thus doubling tool life. A square insert can provide eight cutting edges, and a triangular insert can provide six edges. When all of the edges on one side of the insert become dull, it can be flipped over so the edges on the opposite side can be put to work. Negative rake tooling works well for machining hard, brittle metals.

Abrasive Choices
The development of carbide materials with extremely fine grain size has improved the durability and performance of carbide cutting tools. Carbide valve guide reamers and carbide valve seat cutters are indispensable tools in most shops today. Carbide inserts are also great for high speed milling and boring operations. Newer style boring machines with spindle...

Click here to read more from Engine Builder

Babcox Media •
3550 Embassy Parkway
Akron, OH 44333
330-670-1234 • (FAX) 330-670-0874