Cutters and Abrasives Glasgow KY

Looking for Cutters and Abrasives in Glasgow? We have compiled a list of businesses and services around Glasgow that should help you with your search. We hope this page helps you find Cutters and Abrasives in Glasgow.

Morans Auto Teck Alignment
(270) 678-7575
1333 Cleveland Avenue
Glasgow, KY
Services
AC and Heating Repair

Glasgow Automotive Repair
(270) 659-0362
110 N Broadway Street
Glasgow, KY
Services
AC and Heating Repair

Glasgow Tire & Auto Center Inc
(270) 651-7075
602 Happy Valley Rd
Glasgow, KY
Services
Car Washes, Car Detailing, Tire Shops

B R Tire & Automotive Service
(270) 651-5153
1037 W Main St
Glasgow, KY
Services
Car Washes, Car Detailing, Tire Shops

Wal-Mart
(270) 651-8294
100 Barren River Plz
Glasgow, KY
Services
Car Washes, Car Detailing, Tire Shops

K C Trucks
(270) 629-2886
2223 Scottsville Road
Glasgow, KY
Services
Fabrication and Restoration,Trailer Repair,Truck Parts

Autozone
(270) 651-9693
215 Smith Rd
Glasgow, KY
Services
Auto Parts

Highland Express Lube
(270) 659-9966
236 S L Rogers Wells Blvd
Glasgow, KY
Services
Oil Change and Lube

Big O Tires
(270) 651-7236
209 Smith Rd
Glasgow, KY
Services
Car Washes, Car Detailing, Tire Shops

Napa Auto Parts
(270) 651-7200
103 Shane Dr
Glasgow, KY
Services
Auto Parts, Car Washes, Car Detailing

Advanced Machine Tooling – Cutters and Abrasives

High speed milling machines, boring machines and sophisticated CNC machining centers are found in many machine shops today. Faster cutting speeds and automated controls have boosted productivity as well as precision. But to get the most out of these machines, the proper tooling inserts must be used.

Larry Carley

The key to boosting productivity is to remove more metal in less time. However, faster cutting speeds and feeds require tooling inserts that can take the heat and abuse without dulling. To achieve these goals, tooling suppliers have come up with various cutter shapes, edge geometries and surface coatings that significantly improve tool performance and life.
One way to achieve better tool performance is to use an insert that cuts easier so less horsepower is required to turn it, even at high speeds and feed rates. An insert that cuts cleanly and easily will produce a smoother finish and experience less vibration and chatter.

The angle at which an insert is held with respect to the work surface affects how efficiently it cuts. Positive rake tooling holds the insert at a slight angle so the edge of the insert cuts into the surface of the metal, sort of like a plow digging into soil. Positive rake tooling generally requires less cutting force and pressure, runs cooler and provides longer insert life.

But it can also increase edge chipping on inserts, so it typically works best with shallow cuts and lower speeds and feeds. Also, a positive rake only allows the upper edge of the insert to be used, preventing the insert from being flipped over when the edge becomes dull. Thus, a four-sided positive rake insert would have only four cutting edges (each side of the square on the top side).

Negative rake tooling, by comparison, holds the tool perpendicular or at a slight negative angle to the work piece so the edge of the insert drags across the surface with more of a scraping action as it cuts. This requires more pressure and horsepower to machine the metal, and it produces more heat. But a negative rake also provides more support for the insert and allows deeper cuts and high stock removal rates at higher speeds.

A negative rake also doubles the number of available cutting edges that can be used on a single insert, thus doubling tool life. A square insert can provide eight cutting edges, and a triangular insert can provide six edges. When all of the edges on one side of the insert become dull, it can be flipped over so the edges on the opposite side can be put to work. Negative rake tooling works well for machining hard, brittle metals.

Abrasive Choices
The development of carbide materials with extremely fine grain size has improved the durability and performance of carbide cutting tools. Carbide valve guide reamers and carbide valve seat cutters are indispensable tools in most shops today. Carbide inserts are also great for high speed milling and boring operations. Newer style boring machines with spindle...

Click here to read more from Engine Builder

Babcox Media • www.babcox.com
3550 Embassy Parkway
Akron, OH 44333
330-670-1234 • (FAX) 330-670-0874